How should high-temperature smoke exhaust axial fans be installed?

How should high-temperature smoke exhaust axial fans be installed?

The installation of high-temperature smoke exhaust axial fans must be taken seriously and is typically carried out by experts and technical personnel. During installation, specific precision requirements, as well as the machine’s power and speed, must be taken into account. Of course, to ensure proper operation, installation technicians must correctly set up and commission the high-temperature smoke exhaust axial fans in accordance with various requirements. So, what is the installation method? First, select a suitable installation site, then clean it and confirm that the surface is firm and level. Second, place the base of the high-temperature smoke exhaust axial fan on the foundation surface, and insert shims between the foundation surface and the base of the fan. Furthermore, fill the gaps between them with lime mortar. If there are no special installation requirements, steel plates of various thicknesses can be used as shims to adjust the high-temperature smoke exhaust axial fan. Specifically, use several shims of varying thicknesses to adjust the level until the desired alignment is achieved. During the adjustment process, be sure to insert shims on both sides of the anchor bolts and tighten the bolts appropriately until the requirements are met. When installation conditions are stringent, pour sufficient mortar into the anchor bolt sockets beforehand. Wait until it has fully cured before adjusting the height of the high-temperature smoke exhaust axial fan. Once the alignment is finalized, pour mortar into the gap between the concrete foundation and the base. Generally, if the high-temperature smoke exhaust axial fan is expected to perform more critical functions, the installation requirements for levelness will be higher. In such cases, use shims to adjust the level until the unit is properly leveled.